Professional manufacturer of bell-type annealing furnace
Annealing process cooling is realized for the bell-type furnace
The cooling cap is made of heat-resistant steel plate and reinforcedwith section steel. The lower part has supporting legs, the upper part of the shell is equipped with a cooling fan, and the top is equipped with a sprinkler head. With a water small nozzle, The inner cap can be cooled by wind and water respectively to speed up the cooling, improve The productivity. The cooling cap is provided with a lifting device at the top, and the guiding devices on both sides enable it tobe placed correctly on the base. Equipped with electrical and cooling medium quick connector.
Each cooling cap include:
Stainless steel housing with reinforcement
Stainless steel sprinklers including piping, hoses and quick couplings
Lifting device and guide ear
Cooling fan with hose to eliminate water
Water supply valve and sprinkler drain valve
Power and signal plug
The equipment is cooled by an air/water mixture cooling cap.
In the first stage, the protective cap is cooled to 250℃/380 ℃with air.
The water is then sprayed quickly and evenly onto the surface of the protective cap by a specially developed system.
Automatically switch to water cooling according to the set program.
Or use high-speed air for cooling, or integrated full-flow cooling (water, air cooling at the same time).
① Cooling air fan
② Water cooling spray head
③ Folding hook and loop lifting device
④ Inner cap and lifting ring
⑤ Charging work base